Miniature / Subminiature EMI Filters

Download Spec Sheet (PDF Format)

Applications

Manufactured to the general requirements of MIL-PRF-15733.

Sub Miniature - Epoxy Sealed

  • CIRCUIT
  • SMALLEST SIZES AVAILABLE
  • FULL LOAD INSERTION LOSS
  • TEMPERATURE RANGE -55º TO +125ºC
  • RATED CURRENT 10 AMPS
  • VOLTAGE RATINGS TO 1000VDC

PART NO. VOLTAGE INSERTION LOSS A B C D E F
50 MC 100 MC 500MC
F01-05 50 26db 46db 63db .117 .125 .175 .62 .020 .073
F02-10 100 30 50 70 .200 .187 .281 .75 .025 .112
F02-30 300 28 48 66 .200 .187 .281 .75 .025 .112
F03-30 300 35 54 70 .260 .218 .293 1.0 .032 .155
F03-50 500 30 50 70 .260 .218 .293 1.0 .032 .155
F04-50 500 38 56 70 .312 .281 .326 1.2 .040 .245
F04-X1 1000 30 49 68 .312 .281 .326 1.2 .040 .245
FR1-05 50 26db 46db 63db .156 .125 .218 .62 .020 4-40
FR2-10 100 30 50 70 .187 .187 .312 .75 .025 8-32
FR2-30 300 28 48 66 .187 .187 .312 .75 .025 8-32
FR3-30 300 35 54 70 .250 .218 .343 1.0 .032 12-32
FR3-50 500 30 50 70 .250 .218 .343 1.0 .032 12-32
FR4-50 500 38 56 70 .375 .281 .406 1.2 .040 5/16-24
FR4-X1 1000 30 49 68 .375 .281 .406 1.2 .040 5/16-24

Sub Miniature - Hermetically Sealed

  • THESE SUB-MINIATURE EMI FILTERS ARE THE SMALLEST AVAILABLE
  • TEMPERATURE RANGE: -55°C to +125°C
  • CURRENT RAINGS TO 15 AMPS
  • VOLTAGE RATINGS TO 500 VOLTS
PART NO. VOLTAGE INSERTION LOSS A B C D E F
50 MC 100 MC 500MC
FS1-05 50 26db 46db 63db .156 .125 .218 .70 .050 4-40*
FS2-10 100 30 50 70 .187 .247 .372 .92 .050 8-32
FS2-30 300 28 48 66 .187 .247 .372 .92 .050 8-32
FS3-30 300 35 54 70 .250 .278 .403 .98 .060 12-32
FS3-50 500 30 50 70 .250 .278 .403 .98 .060 12-32
FS4-50 500 38 56 70 .375 .341 .466 1.10 .060 5/16-24

*THREADED END IS EPOXY SEALED (this unit only).

Feedthru Capacitors

  • VOLTAGES TO 300 VDC
  • EPOXY SEALED
  • TEMPERATURE RANGE -55°C to +125°C
  • INSULATION RESISTANCE: 1000MΩµf min.
  • DISSIPATION FACTOR: 2.5% max.

Also Available

  • Hermetically Sealed
  • Higher Capacitance Values
  • Higher Voltages
TYPE A B C D E F DC VOLTAGE MAXIMUM CAPACITANCE
CR4 .156 .125 .218 .62 .032 4-40 50
100
200		 .013µf
6800pf
1600pf
CR8 .187 .187 .312 .75 .040 8-32 50
100
200
300		 .13µf
.07µf
.01µf
6800pf
CR12 .250 .218 .343 1.0 .050 12-32 50
100
200
300		 .56µf
.30µf
.07µf
.03µf

Specify Desired Part as Follows:

  1. Type: CR4, CR8, CR12
  2. Voltage: 50VDC=A, 100VDC=B, 200VDC=C, 300VDC=D
  3. Capacitance: Specify Capacitance in Picofarads. The first two digits are significant figures, the third digit is the number of zeroes.
  4. Tolerance: K=±10%, M=±20%, Z=minimum

World's Smallest Threaded EMI Filter

TSE introduced the 2-56 thread EMI filter in 19XX, the smallest available in the industry at that time.

These filters are manufactured to the general requirements of MIL-PRF-15733. Specifications are:

  • CASE MATERIAL: Brass per QQ-B-626
  • FINISH: Gold per MIL-G-45204
  • CURRENT RATING: 5A DC
  • TEMPERATURE RANGE: -55 °C to +125 °C
  • INSULATION RESISTANCE: 10,000 MOhms Mininum
PART NUMBER CAPACITANCE VOLTAGE
FR05L-05 1500 pf 50 VDC
FR05L-05-1 5000 pf 50 VDC
FR05L-05-2 10000 pf 50 VDC
FR05L-10-1 1500 pf 100 VDC
FR05L-10-2 5000 pf 100 VDC
FR05L-10-3 8000 pf 100 VDC
 

Miniature Button Type

  • HERMETICALLY SEALED
  • -55°C TO +125°C OPERATING
  • FINISH PER MIL-T-10727
  • MEETS APPLICABLE PORTIONS OF MIL-PRF-15733
  • OTHER SIZES AND CONFIGURATIONS AVAILABLE

CURRENT RATING: 10ADC

THREAD LENGTH VOLTAGE INSERTION LOSS (TYPICAL)
.187
PART NO.		 .312
PART NO.		 30KHz 100KHz 1MHz 10MHz 1GHz
FB3AOL-1 FB3AOL-2 50 15 24 44 60 70
FB3COL-1 FB3COL-2 100 -- 18 40 56 70
FB3DOL-1 FB3DOL-2 200 -- 10 30 46 70

CURRENT RATING: 15ADC

THREAD LENGTH VOLTAGE INSERTION LOSS (TYPICAL)
.187
PART NO.		 .312
PART NO.		 30KHz 100KHz 1MHz 10MHz 1GHz
FB3AXC-1 FB3AXC-2 50 15 24 44 48 70
FB3CXC-1 FB3CXC-2 100 -- 18 40 44 70
FB3DXC-1 FB3DXC-2 200 -- 10 30 34 65

Miniature 50wvdc (28V, 400Hz)

  • EQUIVALENT to MIL-PRF-15733
  • SMALL SIZE
  • LIGHT WEIGHT
  • MANY DIFFERENT CASE MATERIALS, FINISHES, SIZES AND CIRCUIT CONFIGURATIONS AVAILABLE
  • OPERATING TEMP. -55 TO + 125 C
PART NO. CURRENT AMPS L MAX VOLT DROP I.L. CURVE
F4A1L .1 .625 .16 1
F4A2L .25 .625 .20 2
F4A3L .50 .625 .17 3
 F4A4L 1.0 .625 .13 4
F4A5L 2.0 .625 .13 5
PART NO. CURRENT AMPS L MAX VOLT DROP I.L. CURVE
F4A1P .1 .715 .16 1
F4A2P .25 .715 .20 2
F4A3P .50 .715 .17 3
F4A4P 1.0 .715 .13 4
F4A5P 2.0 .715 .13 5
PART NO. CURRENT AMPS L MAX VOLT DROP I.L. CURVE
F4A1T .1 .910 .32 1
F4A2T .25 .910 .40 2
F4A3T .50 .910 .34 3
F4A4T 1.0 .910 .26 4
F4A5T 2.0 .910 .26 5

* FOR REVERSE THREAD, CHANGE 'L' to 'R'

Miniature 150wvdc (125V, 400Hz)

PART NO. CURRENT AMPS L MAX VOLT DROP I.L. CURVE
F4B1L .1 .625 .16 1
F4B2L .25 .625 .20 2
F4B3L .50 .625 .17 3
F4B4L 1.0 .625 .13 4
F4B5L 2.0 .625 .13 5
PART NO. CURRENT AMPS L MAX VOLT DROP I.L. CURVE
F4B1P .1 .715 .16 1
F4B2P .25 .715 .20 2
F4B3P .50 .715 .17 3
F4B4P 1.0 .715 .13 4
F4B5P 2.0 .715 .13 5
PART NO. CURRENT AMPS L MAX VOLT DROP I.L. CURVE
F4B1T .1 .910 .32 1
F4B2T .25 .910 .40 2
F4B3T .50 .910 .34 3
F4B4T 1.0 .910 .26 4
F4B5T 2.0 .910 .26 5

* FOR REVERSE THREAD, CHANGE 'L' to 'R'

Miniature Circuit

  • MEETS APPLICABLE PORTIONS OF MIL-PRF-15733
  • TEMPERATURE RANGE: -55°C TO +125°C
  • HERMETICALLY SEALED
150 VDC - 115VAC
PART NO. CURRENT AMPS RESISTANCE OHMS DC INSERTION LOSS db (TYPICAL)
      100KHz 150KHz 300KHz 1MNz 1GHz
F6B4P 1 .70 40 50 65 80 80
F6B5P 2 .20 28 40 55 80 80
F686P 3 .10 22 32 52 70 80
F687P 5 .05 -- 15 40 70 80
F680P 10 .01 -- -- 16 58 70
100 VDC
PART NO. CURRENT AMPS RESISTANCE OHMS DC INSERTION LOSS db (TYPICAL)
      100KHz 150KHz 300KHz 1MHz 1GHz
F6C4P 1 .70 60 69 80 80 80
F6C5P 2 .20 50 60 70 80 80
F6C6P 3 .10 36 48 66 80 80
F6C7P 5 .05 20 38 58 80 80
F6C0P 10 .01 18 22 28 40 80

Special Notes

INSTALLATION NOTES: Thermal or mechanical shock may damage filters. The use of heat sinks and controlled temperature soldering irons are recommended. Do not use tools to hold parts for gripping. Insure that mounting surfaces are properly grounded.

Back to Products Page